|
|
|
| Products |
| Categories |
|
|
Ball Valves
1 PCE, BSPT Ends - Reduced Bore,
2 PCE, BSPT Ends - Full Bore,
3 PCE, BSPT Ends - Full Bore,
3 PCE, Butt Weld Ends - Full Bore,
|
 |
|
|
BSP Fittings
BSP Screwed Fittings (rated to 150psi) are generally manufactured to the dimensional standard BS1740, with threads to BS21, with all standard stock items supplied in Grade 316. Dimensions are available upon application, and special items can be made to customer specificationson short lead time.
Full Socket,
Half Socket,
Reducing Socket,
Square Head Plug,
Barrel Nipple,
Close Taper Nipple,
Parallel Nipple,
Weld Nipple,
Hexagon Nipple,
Hexagon Reducing Nipple,
Locknut,
Hexagon Plug,
Hexagon Reducing Bush,
Hexagon Cap,
Equal Tee,
Cone Seat Union,
90° Elbow,
Street Elbow,
Hose Tail,
90° M/M Bend,
|
 |
|
|
BSP Non-Return Valves
Swing Check Valve,
Spring Return,
|
 |
|
|
Butterfly Valve Accessories
Stepless Handle,
On/Off with Proximity Switch,
Scissor Handle,
Gasket,
Mounting Device,
Switch Cam,
Hand Guard,
M12 Proximity Switch,
|
 |
|
|
Butterfly Valves
Butterfly Valves with plain ends and RJT male ends are kept in stock in Grade 316, with Grade 304 available. The valves can also be supplied with other fitting configurations to suit your individual requirements. A large range of screwed and butt weld ball valves are kept in stock, as detailed within this section.
Plain Weld End,
RJT Male/Male End,
Size 0 Actuator,
Size 1 Actuator,
Size 1 Actuator & TOP Box,
|
 |
|
|
Compression Fittings
Compression Fittings are kept in stock as single or double ferrule, in Grade 316, for use with our stock range of small diameter this wall tube.
Straight Coupling,
Reducing Coupling,
Male Stud Coupling,
Female Stud Coupling,
Equal Tee,
Equal Elbow,
Male Stud Elbow,
Female Stud Elbow,
Equal Cross,
|
 |
|
|
Flanges
Flanges Manufactured to the popular British and American standards are available from stock as slip-ons' for NB pipe or OD tube, or blind in Grades 304L and 316L. Gaskets and bolting are kept in stock to compliment the flanges. Special flanges can be manufactured to customer specific dimensions on a short lead time.
ASA Flange - 150lb,
BS4504 Flange - NP16,
BS4505 Flange x Table E Thickness,
BS10 Flange - Table E,
|
 |
|
|
Flat, Angle & Round Bars
Flat, Angle & Round Bars
A selection of popular sizes of Flat Bar, Equal Angle and Round Bars are kept in stock. Bar can be cut into manageable lengths for ease of transport is so required. Please telephone for information on any size of bar that we supply.
Metric Weights of Flat Bar Products,
Metric Weights of Equal Angle Bar Products,
|
 |
|
|
High Pressure Socket Weld Fittings
To compliment the extensive range of stock detailed on this site, we can offer a wide selection of products essential for your installation needs.
90° Elbow,
Cross,
Tee,
45° Elbow,
Half Coupling,
Coupling,
|
 |
|
|
High Pressure Threaded Fittings
To compliment the extensive range of stock detailed on this site, we can offer a wide selection of products essential for your installation needs.
Half Coupling,
Round Cap,
Coupling,
90° Elbow,
Tee,
45° Elbow,
Square Head Plug,
Hex Head Plug,
Hex Head Bushing,
|
 |
|
|
Hygienic Plain End Fittings
Available in Grades 304 and 316 in both descaled and polished finishes, are supplied generally to BS4825 part 2. All products can be manufactured to customer specified dimensions, and ends can be fitted if required. Metric fittings are available in both schedules of dimensions to DIN 11852.
90° Plain Bend, Long,
90° Plain Bend, Short,
180° Bend,
Special 45° Bend,
45° Bend,
Full Equal Tee,
AS Pulled Tee,
AS Pulled Reducing Tee,
Eccentric Reducer,
Concentric Reducer,
Plain Hosetail,
Swept Tee,
'Y' Piece,
Cross,
|
|
|
|
Hygienic Union Parts
Welding part are supplied in Grade 316, and all nuts and clamps in Grade 304, gaskets for all unions are available in a range of materials to suit many applications.
RJT Fittings,
IDF Fittings,
Clamp Assembly,
Clamp Ferrule,
Clamp Seal Ring,
Clamp Blank Cap,
SMS Fittings,
DIN 11851 Fitting, Imperial,
DIN 11851 Fitting, Metric,
Small Unions,
RJT Blank Cap,
RJT Blank Nut,
IDF Blank Cap,
IDF Blank Nut,
Spanner for Hexagonal Nuts,
Spanner for Round Nuts,
RJT/BSP IDF/BSP Adaptor,
|
 |
|
|
Jacketed Fittings
Although there are standard dimensions of Jacketed Fittings that we supply, many special radii and/or leg lengths can be produced to suit customer requirements.
90° Bend,
45° Bend,
Equal Tee,
|
 |
|
|
Nominal Bore Fittings
All fittings are manufactured to the American Standard ASTM A403 with dimensions to ANSI B16.9, stub ends to MSS SP-43, available in Grades 304L and 316L.
90° Long/Short Radius Elbow,
45° Long/Short Radius Elbow,
180° Long/Short Radius Return,
Equal Tee,
Concentric Reducer,
Eccentric Reducer,
Lap Joint Stub End,
End Cap,
Reducing Outlet Tee,
Reducing Outlet Cross,
|
 |
|
|
Non Return Valves
Union Type,
Between Flange Type,
|
 |
|
|
Pipe, Clips & U-Bolts
Pipe clips listed are available with 1/2" BSP boss, metric boss or weld stub. U-bolts with a selcection of popular dimensions are kept in stock, but we can also manufacture to customer requirements. THe standard fixing plates have been developed for use with short pattern OD U-Bolts for attachment to small section framework.
Hinged Pipe Clip,
Bolted Pipe Clip,
Nominal Bore Split Pipe Clip,
Stainless Steel U-Bolt,
Steel U-Bolt Fixing Plate,
Nominal Bore U-Bolt,
|
 |
|
|
Pipe, Tubes & Box Section
A large range of nominal bore pipe, hygienic tube and rolled hollow section is kept in stock to satisfy most customer requirements. Should any special grades and/or dimensions be required, we can offer these on a short lead time.
Weights of Nominal Bore Pipe,
Weights of Hygienic Tube,
Weights of Square Tube,
|
|
|
|
Sample Valves
Drain Cock,
Test Cock,
|
 |
|
|
Tank Equipment
To compliment the extensive range of stock detailed on this site, we can offer a wide selection of products essential for your installation needs.
Spray Ball,
Adjustable Feet,
In Line Sight Glass,
Angular Filter,
In Line Filter,
Tank Sight Glass,
|
 |
|
| |
|
